Instructions

Data Elements: ucInstruction.aspx

Ultimate Digital Tire Pressure Gauge

 Quick Start Instructions

TO TAKE PRESSURES:

Turn unit on (auto-Zeros at turn-on). If Zero is needed quickly tap ON/OFF button. To turn off hold ON/OFF button 1 sec. True Factory Calibrated pressure will be shown.

TO SAVE PRESSURE TO THE DISPLAY:

Push STORE MEMORY button. Start at the Right Front, then the RR, LR, then LF. To clear all temps push & hold STORE MEMORY button for 3 seconds.

FOR METRIC CONVERSION:

In normal pressure mode press MODE and hold 5 seconds. Will stay until changed again.

 

 

 Complete Detailed Instructions

 

TO TAKE PRESSURES: Turn unit on (auto-Zeros at turn on). If Zero is needed quickly tap ON/OFF button. To turn off hold ON/OFF button 1 sec. True factory calibrated pressure will be shown. Be sure TRUE FACTORY Calibration is on the display in the lower right. If not push LOCK TEMP button.

 

Temperature compensated tire gauge pressures  

TO SAVE THIS PRESSURE TO THE DISPLAY: Push STORE MEMORY button. That pressure will be stored on the display. Start at the Right Front, then the Right Rear, Left Rear, then Left Front. Once you have all 4 pressures no more can be stored without clearing. If you have stored the wrong pressure push and hold STORE MEMORY 2 seconds. The last reading will be cleared. Release button and retake pressure. To clear all 4 continue to hold STORE MEMORY for 3 seconds.

 

Related Products
Part: #
Part: #