Quick Start Instructions
TO TAKE PRESSURES:
Turn unit on (auto-Zeros at turn-on). If Zero is needed quickly tap ON/OFF button. To turn off hold ON/OFF button 1 sec. True Factory Calibrated pressure will be shown.
TO SAVE PRESSURE TO THE DISPLAY:
Push STORE MEMORY button. Start at the Right Front, then the RR, LR, then LF. To clear all temps push & hold STORE MEMORY button for 3 seconds.
FOR METRIC CONVERSION:
In normal pressure mode press MODE and hold 5 seconds. Will stay until changed again.
Complete Detailed Instructions
TO TAKE PRESSURES: Turn unit on (auto-Zeros at turn on). If Zero is needed quickly tap ON/OFF button. To turn off hold ON/OFF button 1 sec. True factory calibrated pressure will be shown. Be sure TRUE FACTORY Calibration is on the display in the lower right. If not push LOCK TEMP button.
|
|
TO SAVE THIS PRESSURE TO THE DISPLAY: Push STORE MEMORY button. That pressure will be stored on the display. Start at the Right Front, then the Right Rear, Left Rear, then Left Front. Once you have all 4 pressures no more can be stored without clearing. If you have stored the wrong pressure push and hold STORE MEMORY 2 seconds. The last reading will be cleared. Release button and retake pressure. To clear all 4 continue to hold STORE MEMORY for 3 seconds.
|